WSC Tower Fill System
The WSC Tower Fill System includes build in surface fill and drift eliminators. The packing bundles will increase heat transfer efficiency of cooling tower, and extend the tower's economic life.

The PVC compounds used in fill bundles have outstanding resistance to weather exposure and are nearly impervious to chemical degradation by alkali, acids, grease, fats, oils and biological attacks. PVC also has an excellent fire rating due to its self-extinguishing characteristics and meets or exceeds Cooling Technologies Institute PVC Materials Standards 136.

WSC standard film fill bundles are a PVC .010" cross-corrugated, edge bonded fill with optimally sized microstructure, dedicated glue points, high surface to volume ratio (48 sq. ft. per cu. ft.) and high thermal performance. This fill is designed for either crossflow or counterflow towers. A .015 film fill is available, along with a 68 sq. ft. per cu. ft. surface area for special applications.

The fill system includes a supports deck designed to keep packing material above the wet deck. This allows the hot water to flow more freely through the fill media carrying solids across the wet deck and into the sump. This raised area (approximately 3 to 4 inches) allows water and chemicals to flow underneath the fill bundles during daily operation, as well as during periodic cleaning.

WSC Marine Grade Epoxy
The marine grade epoxy material used is a very high-grade epoxy, giving excellent adhesion, high film coverage, and quick dry time. This material is rustproof and waterproof. It was designed specifically for use on properly prepared steel or masonry surfaces, including immersion (non-potable water) service. The epoxy is ideal for cooling towers, structural steel, piping, storage tanks, machinery, and equipment in petroleum refineries, pulp and paper mills, chemical and fertilizer plants, and sewage treatment plants. The epoxy's exceptionally fast drying time (5 to 7 hrs.) allows equipment to be returned to service quickly.